Résistance 25mm
£14.99/m²
Résistance 25mm Artificial Grass is a real value for money product that provides a great aesthetic and performs terrifically over time. The product comes with Cfl-s1 Fire Rating and is provided with certification.
The product utilises a mixture of straight polyethylene and curled polypropylene micro-nerve yarns that are densely compacted to offer that soft, cushioned feel under foot whilst looking great from all angles. A combination of light and dark green colours are also used alongside the beige field-jute thatch which gives a vibrant yet realistic look.
This product will ensure that your leisure area/ event looks tidy and freshly mown day after day, year upon year whilst beingflame retardant.
Résistance 25mm is manufactured in Holland to the highest European standards and really does look exceptional once laid.
- 2m & 4m widths available
- Cfl-s1 Fire Rated with certification
- UV stabilized
- Pet & child friendly
- Thickness = 25mm
- Total Weight: 1657 GSM
- Stitch rate: 18 per 10cm linear
- Tuft Gauge: 3/8"
- Standard max roll length: 25m
- Drainage Holes: Yes
- No Sand Infill Required
Please note, all cuts on the same order will come from the same batch so you can order 2m & 4m and they will match perfectly.
When joining, please ensure that the pile direction runs the same way, otherwise it will look as though two different grasses have been laid.
A weed membrane is required for all artificial grass installations. This can be found within the accessories category.
Installing artificial grass is a straightforward DIY project for most gardens, patios, and balconies. The key to a long-lasting, natural-looking finish is preparing a solid, well-drained base before the grass is rolled out.
For soil areas, the existing turf is removed and replaced with a compacted sub-base (typically MOT Type 1 or granite dust),followed by a sharp sand or grano dust laying course. This creates a smooth, stable surface that prevents dips and improves drainage. For hard surfaces such as concrete, the grass can usually be fitted directly using adhesive.
Once the base is ready, the grass is rolled out, trimmed to fit, joined where required, and secured around the edges. Brushing the fibres upright and adding kiln-dried sand (if recommended by the manufacturer) helps the pile sit naturally and improves durability.
Most installations are completed in a day for an average garden.
👉 Read the full step-by-step artificial grass installation guide
Artificial grass is designed to be low maintenance, but a small amount of regular care will keep it looking its best for years.
For general upkeep, simply remove leaves and debris with a stiff brush or leaf blower and brush the pile against the grain to keep the fibres upright. Occasional rinsing with water will wash away dust and pollen and help the lawn stay fresh.
For homes with pets, solid waste should be removed as normal and the area lightly hosed down. Most modern artificial grasses have a permeable backing, allowing liquids to drain through easily. A mild detergent or artificial grass cleaner can be used for a deeper clean if needed.
To prevent flattening in high-traffic areas, brush the surface periodically. With this basic care, a good quality artificial lawn will maintain its colour and shape for many years.
👉 Read the complete artificial grass maintenance and cleaning guide
